IRG outdoor single-stage hot water pump

Payment Type: L/C,T/T,D/P,Paypal,Money Gram,Western Union
Incoterm: FOB,CFR,CIF,FCA,CPT
Min. Order: 1 Set/Sets
Delivery Time: 15 Days

Basic Info


Model No.: BODA-199

Product Name: S Series Double Suction Pump


Additional Info


Packaging: wooden box

Productivity: 500

Brand: BODA

Transportation: Ocean,Land,Air

Place of Origin: china

Supply Ability: 500

Certificate: ISO9901

HS Code: 4101201190

Port: Tianjin,Qingdao,Shanghai


Product Description

IHG stainless steel corrosion resistant pipeline pump 2

IRG type single-stage hot water pump|single-suction hot water circulation pump|stainless steel hot water pump is a single-stage single-suction cantilever centrifugal pump, suitable for heating, hot water, air conditioning systems and metallurgy, rubber, printing and dyeing, sugar making industries of various buildings. department. It is used to transport media with a temperature not exceeding 180 ° C and an inlet pressure not higher than 0.8 MPa.

Product Usage

IRG type single-stage hot water pump|single-suction hot water circulation pump|stainless steel hot water pump is a single-stage single-suction cantilever centrifugal pump, suitable for heating, hot water, air conditioning systems and metallurgy, rubber, printing and dyeing, sugar making industries of various buildings. department. It is used to transport media with a temperature not exceeding 180 ° C and an inlet pressure not higher than 0.8 MPa.

Parameter range

Flow rate Q 5.4~400m3/s

Head H 4~80m

Model Description

IRG100-65J-200A

IRG-Single Stage Single Suction Hot Water Centrifugal Pump

100-suction port diameter (mm)

65-outlet diameter (mm)

J- indicates that the motor speed changes

200-impeller nominal diameter (mm)

A- indicates that the impeller diameter is changed (B and C respectively indicate the second, secondary cutting impeller)

IRG type hot water pump structure type

      The pump is horizontally mounted, horizontally axially inhaled and spouted upwards. The pump body is a rear-opening type that can be repaired without disassembling the pump body, suction and discharge pipes. The shaft seal of the pump is sealed with a packing or mechanical seal. The bearings are rolling bearings and are lubricated with thin oil. There are two kinds of pump cover, one is the internal water sealing hole, and the other is the external water sealing. It must be specified when ordering.

The direction of rotation of the IRG type hot water pump is seen from the motor end, and the pump rotates counterclockwise.

IRG type hot water pump main parts material pump over-current parts material, generally gray cast iron.

IRG type hot water pump complete range

Complete supply pump, motor, common base, coupling, and provide check valve, gate valve, low valve, spout cone, whether it is equipped with spout pipe, the user must indicate according to the pipeline device.

Working conditions

1. Suction pressure ≤1.0MPa, or pump system high working pressure ≤1.6MPa, ie suction pressure + pump head ≤1.6MPa, pump static pressure test pressure ≤2.5MPa, please indicate the system working pressure when ordering. When the working pressure of the pump system is greater than 1.6MPa, it should be separately proposed at the time of ordering, so that the over-flow part and the connecting part of the pump are made of cast steel material during manufacture.

2. Ambient temperature <40 ° C, relative humidity <40%.

3. The volume of solid particles in the medium to be transported does not exceed 0.1 per unit volume, and the particle size is <0.2 mm.

Note: If the medium is made of fine particles, please specify when ordering, so that the factory adopts wear-resistant mechanical seal.


Contact Info

CONTACT US

Shijiazhuang Boda Industrial Pump Co., Ltd.

Address: North of Shilipu Village, Chang'an District, Shijiazhuang, China,Shijiazhuang,Hebei

Contact Person: alisa

Phone:86-311-89255090

Fax:86-311-89255098

Full name Contact Phone Content
点击刷新验证码